Support And Downloads from Syil America

home | about us |products| news | Online Store | contact us | forum


	Support
	Support@syilamerica.com

Our Frequently Asked Questions and Answers : CLICK HERE!

Some helpful Video walk through's

Our ever expanding video library can be found here

X4 files

Mach 3 profile for the X4/ X4+ :: SyilX4.zip
Mach 3 profile for the X4/ X4+ with Rev. 3 hardware :: SyilX4_Rev3.zip

Some X3 Quick start items

An introduction to the X3 CNC Mill: Read this First
Our Manual for the X3 CNC Mill: X3 Manual
X3 spindle control board operating instructions: X3 Spindle Control Manual
Spec Sheet on our power Supply: 500W
Adding a provision for a Flood Coolant switched power source to the X3
A quick primer on the The Black Magic of our G-Code spindle

Some C6 Quick start items

Our C6 Lathe Starting Guide: Read this First
Mach 3 profile for the C6 CNC Lathe: Mach_C6
Mach 2 profile for the C6 CNC Lathe: Mach_C6

Mach CNC Controller Software and Profiles

Mach 3 Software: Mach_VerXX
Mach 3 Ver.20 Manual: Mach3_Manual
Machine Profiles for Mach3

Mach 3 Ver 2.00+ profile for the X3 CNC Mill: Mach_X3
Mach 3 profile for the X2 CNC Mill: Mach_X2
Mach 3 profile for the C6 CNC Lathe: Mach_C6

Machine Profiles for Mach2

Mach 2 profile for the X3 CNC Mill: Mach_X3
Mach 2 profile for the X2 CNC Mill: Mach_X2
Mach 2 profile for the C6 CNC Lathe: Mach_C6

Turbo CNC Software and profiles

Turbo CNC. A DOS based controller that is quite powerful and yet easy to use.
It will run our mills on a 120mhz computer.
Turbo CNC profile for the X3
Downloadable :TurboCad post processor for our machines

Bob Cad CAM software

Bob Cad Demos and downloads:
Our splendid POST PROCESSOR for Bob CAD custom made for our machines.

Other Software

Our Useful Links page can be found: Here

A brief History of CNC.

Copyright 2004-2006 Syil America
Sieg and its logo Trademarked by Shanghai SIEG Group All rights reserved.

home | about us |products| news | Online Store | contact us | forum