|
home | about us |products| news | Online Store | contact us | forum |
| X2 | X3 | X4 /+ | U2 | C6 | X5 | |
| X Travel | 9.1 | 15.5 | 15.5 | 9.05 | 5.9 | 15.76 |
| Y Travel | 3.4 | 6.3 | 7.75 | 4.72 | NA | 6.3 |
| Z Travel | 8 | 9.1 | 9.1 | 7.08 | 19.9 | 14.97 |
| Table Size X | 15.75 | 21.65 | 21.65 | 17.71 | NA | 19.7 |
| Table Size Y | 3.65 | 6.3 | 6.3 | 4.73 | NA | 6.3 |
| Drilling Capacity | 0.63 | 1 | 1 | 0.63 | 1 | 0.985' |
| Milling Capacity | 0.5 | 1 | 1 | 0.5 | NA | 0.63" |
| Max Tapping Capacity | NA | 0.5 | NA | NA | NA | 1 |
| Face Mill Capacity | 1.25 | 2 | 2 | 2 | NA | 3 |
| Min Spindle Speed | 80 | 200 | 200 | 80 | 60 | 100 |
| Max Spindle Speed | 4300 | 3500 | 3500 | 2500 | 2500 | 3500 |
| Weight (lbs) | 145 | 430 | 490 | 529 | 425 | 154 |
| Spindle Type | R8 | R8 | R8 | MT3 | MT3 | MT3 |
| Grinding Wheel Size | NA | NA | NA | 4" | NA | NA |
| Motor Size (hp) | 0.5 | 1.3 | 1.3 | 1.3 | 1 | 1.3 |
| Spindle Control | No | Yes | Yes | Yes | Not Yet | No |
| Flood Coolant Ready | No | Yes | Yes | Yes | Not Yet | No |
| Flood Coolant Included | No | No | No | Yes | No | No |
| Homing Switched | Yes | Yes | Yes | Yes | Yes | No |
| Computer Included | No | No | No | No | No | No |
| Accuracy | 0.0009" | 0.0005" | 0.0005" | 0.0003" | 0.0005" | 0.001" |
| Repeatability | 0.0004" | 0.0004" | 0.0004" | 0.0003" | 0.0004" | 0.0004" |
| Rapid Traverse Speeds | 100 ipm | 100 ipm | 250 ipm | 100 ipm | 60 ipm | 100 ipm |
| Screw type | Ball Screw | Ball Screw | Ball Screw | Ball Screw | Ball Screw | Ball Screw |
| Backlash Compensation | Single | Double | Double | Sgl/Dbl | Dbl | Dbl |
| home | about us |products| news | Online Store | contact us | forum | |